FAQ #225
Teladrop 50g sensor installation and activation in CDA.-2019

Last Updated On 01/16/2019 12:59 PM by

tab28682

Question
Do we need to correctly set or reset the Teladrop 50G sensor before installing the three sensors in the CDA?
Answer
The 50g Teladrop sensors arrive from the factory in the "tripped" position, showing dark blue or black arrows. The sensors must be carried in the.CDA in the activated mode, showing red arrows only.

Please follow the correct setting process documentation found at the link below to activate the sensors before use. There are two downloadable files you need to read and be familiar with:

https://www.telatemp.com/p/415/50g-teladrop-drop-n-tell-damage-indicator

Any CDA showing one or more dark arrows on any of the three Sensors after an official flight will be disqualified.

Please note that the scoring and weigh in officials must be able to cleary see and verify the status of each sensor after a CDA flight.
No Attachments

Rule Numbers
2019:8.6.2.7